each filter downward to remove.
2.To install the grease filters, align rear filter tabs with slots in the hood.
Pull down the metal latch tab, push each filter into position and
release. Make sure filters are securely engaged after installation.
9.LIGHT BULBS
WARNING
Always switch off the electrical supply before carrying out any operation on
the appliance.
This range hood requires two UL approved halogen bulbs (Type JC, 12 V,
20 W Max, G-4 Base).
WARNING
In order to prevent the risk of personal injury, the halogen bulbs must be cooled down before removing them.
To change bulbs:
1.Gently push the rim upward and turn counterclockwise to disengage
the light bulb cover.
2.Replace with Type JC, 12 V, 20 W Max, G-4 Base halogen bulb.
CAUTION
Do not touch replacement bulb with bare hands!
3.Replace the light bulb cover by pushing the rim upward and rotating the light bulb cover clockwise.
OPERATION
2-Decrease
4-Increase
5-Lights
The hood is operated using the push buttons located on the front panel.
Activating Clock Function
While the range hood is off,press power button(1) for 2 seconds to enter the clock setting mode,press increase(4) or
decrease(2) to set the hour. Press power button(1) again to set the minutes, set by pressing 2 (decrease) or 4 (increase).
Activating Power-Off Delay Function:
While the range hood is on and the blower is running in normal mode,press power button(1) for 2 seconds to enter Delay time
setting mode,press increase(4) or decrease(2) to set the time.
LIGHTING: Pressing the light button (5) once will turn the LCD screen on. To turn the lights on, press the lighting
button (5) once more. Press it again to turn the lights OFF. The LCD screen will turn automatically off after 15 seconds of
inactivity (blower and/or lights).
9
English
8.GREASE FILTERS
1.To remove the grease filters, pull down on the metal latch tab and tilt
(bulbs included)
3-Color Screen
1-Power
