63545005
FS40A-U2
3
INTRODUCTION
The Pedestal Fan features three speeds, a swivel action head providing a smooth oscillation action
along with low noise levels, low electrical usage, and safety features, while still providing efficient air
flow.
PART NAME
BASE AND TUBE ASSEMBLY
Take the base and tube parts from the packing box and loosen the 4 joint screws and 4 nuts. Fasten
the tube on the base plate with the joint screws and nuts.
ASSEMBLY
1. Remove all parts from the packing. Separate the front and rear guard if they are connected.
2. Remove the four position screws on the motor and align the rear guard with the four holes on the
motor (handle on top of the fan). Insert the four position screws and tighten.
3. Loosen the set screw on the blade, slide the blade onto the shaft of the motor, then tighten the set
screw onto the flat side of the shaft to secure the blade. Ensure that the blade does not touch the
guards.
4. Assemble the front guard to the rear guard. Tighten the screw and nut, secure the retaining clips
.
1. joint screw
2. front guard
3. blade
4. position screws
5. rear guard
6. joint nut
7. set screw
8. oscillation control knob
9. motor
10. speed control
11. power cord
12. tube
13. ornamental cover
14. joint screws
15. spring washers
16. spring
17. base
18. plane washers
19. spring washers
20. joint screws
