Ubee UBC1301-AA00, Руководство пользователя

Страница: 48 / 99

Ubee Interactive Using the WLAN Option
Ubee UBC1301-AA00 Advanced Wireless Voice Gateway Subscriber User Guide • March 2017 43
Label Description
The following fields are available for configuring the 2.4GHz and 5GHz radios.
Wireless Allows you to enable or disable the wireless radio. Both radios are enable by default.
Network Name
(SSID)
Displays the wireless network name (SSID) to which client devices connect. It displays the
default SSID.
The default SSID for the UBC1301-AA00 is “WIFI” plus the last 6 characters of the Cable
Modem MAC address (in upper case) for the 2.4GHz radio band. “-5G” is added to the end for
the 5GHz radio band. The SSIDs can be found on the device label.
If you want to change the device SSID, delete the default SSID and type in the name of your
choice, then click Apply.
Hidden SSID
When enabled, the SSID is not visible to wireless clients unless it is manually set up on the
client. When disabled, the SSID is visible to wireless clients wishing to connect to the
UBC1303-AA00.
802.11 mode
Sets the wireless networking standard. Available modes for selection are:
Œ
2.4GHz: B/G/N-mix (default), G/N-mix, B/G-mix, and N-only
Œ
5GHz: A/N/AC-mix (default), N/AC-mix, AC-only, A-only, N-only
WMM Support
When WMM (WiFi Multimedia) support in on, quality of service (QoS) is enabled to ensure the
best service in your wireless network.
Control Channel
Selects a specific channel to deploy the wireless network. This allows you to set the operating
frequency/channel depending on your particular region. Channel selection can have an impact
on wireless networking performance. The current channel number is displayed as well as the
interference level. Available channels for selection are:
Œ
2.4GHz: Auto, 1, 2, 3, 4, 5, 6, 7, 8, 9
Œ
5GHz: Auto, 36, 52, 100, 116, 40, 56, 104, 120, 44, 60, 108, 124, 48, 64, 112, 128
For more information regarding channels selection, refer to Selecting a Wireless Channel on
page 53 .
Bandwidth
Sets the channel bandwidth and displays the current channel bandwidth. Available bandwidths
for selection are:
Œ
2.4GHz: 20MHz, 40MHz
Œ
5GHz: 20MHz, 40MHz, 80MHz
NOTE:
Œ
802.11b and 802.11g support 2.4GHz, 20MHz wide channels
Œ
802.11n supports 2.4GHz or 5GHz, 20MHz or 40MHz wide channels
Œ
802.11a supports 5GHz, 20MHz wide channels
Œ
802.11ac supports 5GHz, 20MHz, 40MHz or 80MHz wide channels