Ubee Interactive — www.ubeeinteractive.com
3
Ubee DVW32G6 – Safety and Installation Product Insert v1.0
5. Clean the device only with a clean, dry cloth.
Do not use liquid or chemical cleaners.
6. Avoid static discharge when touching the
device by first touching the coaxial connector
of the coaxial cable.
7. Installation of the device should include
grounding the coaxial cable to the earth at the
building entrance per ANSI/NFPA 70 and the
National Electrical Code (NEC, in particular,
Section 820.93, Grounding of the Outer
Conductive Shield of a Coaxial Cable). The
device is designed for IT power systems with
phase-to-phase voltage at 110V.
8. Disconnecting the Device: If the device
becomes damaged or encounters some other
abnormality, disconnect the power plug from
the AC wall outlet immediately.
9. The device should be installed in a location
not to exceed the maximum temperature of
40
degrees
Celsius
(104
degrees
Fahrenheit).
10. This device MUST be placed upright for best
WiFi coverage
with the aid of the stand, the
stand must be fixed at a 90-degree angle to
the device. Otherwise, the device will have
the risk of tipping over.
11. Keep the device away from Children and
Pets.
12. Place the device on a cool surface. Failure to
do so may result in overheating which can
cause extreme damage.
13. Do not modify or attempt to disassemble the
device. Use
it
only
according
to
the
instructions.
14. Do not dispose of the device in a trash
container. Please recycle.
