ubbink Eli-Indoor 200i, Инструкция по эксплуатации

Страница: 3 / 48

3
Ubbink Eli-Indoor pumps are quality products, designed on the basis of the very latest technological
developments in this fi eld. The pumps are suitable for use in the house.
The pumps have been developed on the basis of ‘synchronous technology’ whereby the electrical parts are
fully and safely encapsulated in epoxy resin.
Note!
Never shorten or damage the cable. The pump may not be used in swimming pools or places accessible to the general
public. Avoid contact with the pond water. Place the pump completely under the water, do not place in a dry area or allow it
to run dry!
Technical data
Eli-Indoor 200i Eli-Indoor 350i Eli-Indoor 600i
Article number 1351360 1351366 1351372
Mains voltage 230VAC 230VAC 230VAC
Nominal power 5 Watt 6 Watt 9 Watt
Capacity 200 l/h 370 l/h 550 l/h
Lift 0.6 m 0.7 m 1.3 m
Maximum water temperature 35° C 35° C 35° C
Application
All pumps have an economic, highly powerful and extremely reliable motor. The pump can be used either horizontally or
vertically.
Depending on the position, the pump housing may have to be aimed (turned).
Taking into use
Read these instructions for use through extremely carefully.
Never let the pump run dry.
Place the pump at least 0.1 m and no more than 1.0 m below the surface of the water, on a stable bed free of sludge, sand
or other dirt. The capacity can be adjusted using the slide.
1
Instructions for use Eli-Indoor pumps