ubabub Nifty U3005 Скачать руководство пользователя страница 4

       

WARNING!

       

ENTRAPMENT/

STRANGULATION 

HAZARD

• 

Infants have died in toddler beds from entrapment and strangulation.

• 

Failure to follow these warnings and the assembly instructions could  

  result in serious injury or death.

• 

NEVER use bed with children under 15 months.

• 

NEVER place bed near windows where cords from blinds or drapes 

  may strangle a child.

• 

If guard rails are used as the mattress containment means, guard 

  rails provided must be used to avoid the formation of a gap between 

  the mattress and the bed that could cause an entrapment.

• 

DO NOT place bed near windows where cords from blinds or drapes 

  may strangle a child.   

• 

DO NOT place items with a string, cord, or ribbon, around a child’s 

  neck, such as a hood strings or pacifier cords.   

• 

DO NOT suspend strings over a toddler bed for any reason.

       

The mattress intended for use on the bed shall 

be a full-size mattress having minimum dimen-

sions of 51-5/8” (1310 mm) in length, 27-1/4”(690 

mm) in width and 4” (100 mm) in thickness and 

not exceeding 6” (152 mm).

The intended user’s minimum age must be at 

least 15 months old and maximum

weight must not exceed 50 lbs (22.7 kg).

Содержание Nifty U3005





























Отзывы: