ubabub Nifty U0300, Инструкция по эксплуатации

Страница: 12 / 36

End panel assembly
Fig. 05
12
C
Insert the
locking Cam
nut.
Use screwdriver to turn locking
Cam nuts clockwise until tight.
5.1
5.2
5.3
Insert the
connecting pins
to the rails.
x 6
Step 1
Take the remaining end Panel.
Step 2
Step 3 Insert locking Cams on both side panels and lower rails. (see Fig. 05 ).
Step 4
align the locking Cams and connecting pins. Insert the connecting pins
to the side panels and lower rails. Make sure connecting pins are passing
through the locking Cams. Insert the locking Cam nuts. Use screwdriver
to turn locking Cam nuts clockwise until tight. (see
Fig. 05
).
Install the end Panel, align all Connecting & support Pins before applying
any pressure to panel. (see main diagram below).