UB Sports B200, Руководство пользователя

Страница: 10 / 12

ASSEMBLY INSTRUCTION
7
8
Remove the M5x25 Bolt (57) and Ø5 Big Curve
Washer (51) from the Tension Control Knob (7).
Put the cable end of resistance cable of Tension
Control Knob (7) into the spring hook of Tension
Cable (53) as shown in drawing A.
Pull the resistance cable of Tension Control Knob
(7) up and force it into the gap of metal bracket of
Tension Cable (53) as shown in drawing B.
Attach the Tension Control Knob (7) onto the
Handlebar Post (3) with the M5x25 Bolt (57) and
Ø5 Big Curve Washer (51) that were removed.
Remove two M8x15 Bolts (24) and Ø8 Curve
Washers (37) from the Handlebar Post (3).
Attach the Handlebar (2) onto the Handlebar Post
(3) with two M8x15 Bolts (24) and Ø8 Curve
Washers (37) that were removed.
Remove two M5x10 Bolts (47) from the Computer
(10).
Connect the Middle Section Sensor Wire (55) to the
wire that comes from the Computer (10).
Attach the Computer (10) onto the top end of the
Handlebar Post (3) with two M5x10 Bolts (47) that
were removed.
A B
7
60
7
53
53
7
57
51
3
10
2
55
47
37
24
10