UAV-1003599-001
24
Rev A
Ensure that the tailBeaconX is oriented consistent with the
installation direction indication on the labels. This ensures the
GPS antenna is correctly oriented skyward.
2. Secure the tailBeaconX to the Mounting Plate using the two supplied
M2 anti-rotation screws and the included 1.5mm hex driver. Ensure
threads are fully coated in thread locking compound before
installation. Tighten the anti-rotation screws until snug (3-4 in-lb) DO
NOT overtighten. The head of the screw may have some clearance
under it; this is okay if the proper torque is achieved.
3. If tailBeaconX has been installed on a moving control surface,
specific attention must be paid to proper balance.
Refer to the
Aircraft
Manufacturer's Service Manual to determine if balancing is
required and for balancing instructions.
!
