UAV-1002156-001
ECCN 7A994
Page
17 | 37
REV I
Approvals do not cover adaptations to the aircraft necessary to
accommodate ancillary equipment such as power provisions, mounting
devices or external antennas, such items must still be approved under
existing minor modification/change processes applicable to the aircraft.
Warning: This transceiver is to be used to improve pilot situational
awareness only and as a navigational aid. It is not intended for use in IFR
flight conditions. uAvionix is not res
ponsible for the transceiver’s end use
and will not be held liable for any events occurring from its use or misuse.
Usage Outside of the United Kingdom or Australia
Transmit functionality is currently approved for use only in the United
Kingdom or Australia. If flying outside these locations, configure the device
for receive functionality only or consult your local regulator for approval.
8 Equipment Installation and Configuration
This section describes the installation and configuration of the SkyEcho
and related accessories in the aircraft, including mounting, wiring, and
connections.
8.1 Mounting
SkyEcho is approved as a portable ECD. SkyEcho should be placed
vertically orientated on an aircraft window with the optional suction cup
mount with line of sight and visibility in the direction of travel and to the sky
for the internal GPS. Installation location can significantly impact the
receive and transmit range of the device.
