![background image](http://html1.mh-extra.com/html/nuttall/flexeserve-zone/flexeserve-zone_how-to-manual_1719631001.webp)
FLEXESERVE
® | Flexeserve Zone® - Replacing a fan plate | V1 MAR 2021
© 2021 The Alan Nuttall Partnership Ltd
NOTE
Ensure that the unit is switched off and disconnected from the power supply when
carrying out this task.
How to guide
Flexeserve Zone
®
- Replacing a fan plate
• Ensure that
the unit is
fully isolated
from the
mains supply.
• Undo fixings in
top rear back
panel using a
2.5mm hex key.
Note: A 3mm
hex key is
required on
countertop
units.
• Remove top rear
back panel and
lower ones (as
required) by
pushing them
up and away
from the unit.
• Unplug the
fan cable
from the
loom.
• Remove the
fan plug by
removing the
M3 screws
using a PZ1
screwdriver.
• Remove the blank
off plug and keep
to one side for
replacement fan
plate.
1
2
3
4
5
6