RT-2087/ZPX-A User and Installation Guide
UAV-1005667-001 Rev A
ECCN 7A994
Page 9 | 48
5 System Information
5.1 Certification Applicability
This installation manual provides mechanical and electrical information
necessary to install the RT-2087/ZPX-A (ZPX-A). It is not equivalent to an
approved, airframe-specific maintenance manual, installation design
drawing, or installation data package. The content of this manual assumes
use by competent and qualified personnel using standard maintenance
procedures in accordance with Title 14 of the Code of Federal Regulations
and other related accepted procedures. The conditions and tests required
for approval of this article are minimum performance standards.
Those installing this AIMS-certified article either on or within a specific type
or class of aircraft must determine that the aircraft installation conditions
are within the standards, which include any accepted integrated functions
not specified by the standards.
5.2 AIMS-Certified Performance
ZPX-A is based on the uAvionix TSO-certified ping200X, with the addition
of an enable/disable control for the Mode A X-bit. ZPX-A is designed to
meet the performance requirements of the applicable FAA Technical
Standard Orders (TSOs), RTCA Minimum Operational Performance
Standards (MOPS), and DoD AIMS performance and test standards
outlined below.
Function
Document
Class
AIR TRAFFIC CONTROL RADAR BEACON
SYSTEM/MODE SELECT (ATCRBS /
MODE S) AIRBORNE EQUIPMENT
TSO-C112e
(INCOMPLETE)
RTCA/DO-181E
Level 2els Class 1
[1]
1090 MHz EXTENDED SQUITTER
AUTOMATIC DEPENDENT
SURVEILLANCE
– BROADCAST (ADS-B)
TSO-C166b
RTCA/DO-260B
Class B1S
AUTOMATIC PRESSURE ALTITUDE
CODE-GENERATING EQUIPMENT
TSO-C88b
Pressure altitude sensor
compliant to 35,000 ft MSL
(Internal).
