uAvionix pingRX Pro Скачать руководство пользователя страница 6

Страница: 6 / 7

The latest APM firmware must

be installed onto the Pixhawk

autopilot before using the

pingRX Pro.

set parameters

configure

</>

Parameter

Description

ADSB_ENABLE

Enable ADS-B listening by changing the

value from 0 to 1. Power cycle the Cube after

updating the value to enable additional ADS-B

parameters.

Default: 0

Value Range: 0-1

ADSB_LIST_RADIUS

ADS-B List Radius Filter. Vehicles outside

this radius will be completely ignored, they

will not show up in the list or be used for

avoidance calculations.

Default: 2000

Value Range: 1-100000

1. Open Mission Planner
2. Connect to autopilot
3. Navigate to:

Config/Tuning > Full Parameter List

For more information on ADS-B configuration and avoidance behavior:

ardupilot.org/plane/docs/common-ads-b-reciever.html

Содержание pingRX Pro

Страница 1: ...Logo font Helvetica Neue LT Std 75 Bold uAvionix Brand Logo Specs REV D 20160329 PANTONE P 48 16 C OR EQUIVALENT PANTONE P 179 11 C OR EQUIVALENT uAvionix ping ADS B Receiver QUICK START GUIDE ...

Страница 3: ...real time situational awareness in the airspace to any Ardupilot Pixhawk or Skynode based drone A complete ICD is available at uAvionix com with details on integration with unsupported systems 1 mount 2 connect 3 configure 4 launch Quick Start Guide ...

Страница 4: ... screws x2 mount the pingRX Pro inside or on the aircraft The external dipole antenna should be mounted so that the antenna is oriented vertically with a clear view of the ground and sky x2 Mount Base Unit Mount External Antenna ...

Страница 5: ... into pingRX Pro and TELEM2 port of Pixhawk Cube Connect a compatible telemetry radio set such as microLink to TELEM1 to complete the assembly and provide data from pingRX Pro to your ground station computer GSC pingRX Pro Telemetry Radio ...