5
Mount
Connect
the
JST ZHR-5 cable
to the 5 pin
port on the bottom of
FYXnav
. Route cable
through channel in adhesive.
Mount
FYXnav
to a clean, smooth surface. The Ping logo on
the top of the FYXNav should have an unob-
structed view of the sky.
Mount FYXnav
using the provided
double-
sided adhesive.
Remove both top and bottom backing from provided
double sided tape. Adhere double sided tape to the
underside of FYXnav in the correct orientation so the
barometer and 5-pin connector are not blocked by
the adhesive.
Mount
ping20S
to a suitable flat surface
using the provided
double-sided mounting
tape
.
Affix mounting tape to ping20S
and
attach the transponder to the aircraft.
