uAvionix FlightStation, Руководство пользователя и инструкция по установке

Страница: 10 / 25

UAV-1007487-001 Page
10 | 25
Connect the FlightStation with the M12 connector using Cat5e or better
ethernet cable. It is recommended to use shielded Cat5e cable to protect
against EMI interference depending on your installation location.
Seat M12 plug into the FlightStation M12 receptacle then install and tighten
the connector as shown. M12 X Code cables can be sourced to
accommodate longer installation runs. Alternatively, a shielded, waterproof
coupler can be installed to extend a cable run to the POE switch/injector
location.
Mount FlightStation as high on the pole as possible, preferably at the top
with an unobstructed 360° view of the sky.
Secure the ethernet cable to the FlightStation mounting arm or to the pole
using a zip tie in a drip loop configuration for strain relief.