Uavframe CW8, Инструкция по сборке

Страница: 5 / 11

Mount the aluminum brackets/ wiredampersystem (if bought
separately) to the bottom centerplate, you can let the logo “cw8”
point up or downwards, choose here to fly in + or x mode, the holes
are for both modes already pre- drilled as well for bigger and
smaller landing gears
At this point you put the lower centerplate over the countersunk
bolts .make sure the logo’s of both plates are above eachother
(aligned) you can mount the washers and the lock nuts on the 16
countersunk bolts, just tighten them a few turns, so they will not
come off.