Quick Installation Guide of WL-2111
12
Wireless USB Adaptor provides plug-and-play function, therefore you only need to plug in the USB
cables & you can experience the great speed of Internet instantly.
If the Wireless USB Adaptor is installed properly, Windows will auto-detect the hardware. This will take
around 15 seconds. You can find the following icons on the bottom corner of start up bar:
Ø
When the icon is in “
Blue
” color, it means the connection of USB Adaptor is successful.
Ø
When it is in “
Red
” color that means the connection has been broken.
Note:
1. Please refer to Q & A in page 24 for dealing with failed connection.
2. At any time if you want to remove the Wireless USB Adaptor, just unplug the USB cable & the
modem will be successfully removed.
When the connection fails between Wireless USB Adaptor and Wireless AP. Double click on the
icon or go to “
Start
”
à
“
Program
”
à
“
ATMEL 802.11 Wireless LAN
”
à
“
Configuration & Monitor
Utility
”
1. Choose the “Site Survey”. (This window shows all the available AP. The % means the connection
quality, the higher the %, the better the connection.)
à
“
Re-Scan
”
à
double click on AP Listed under
BSSID
; it will jump to “
Monitor
” page.
(Figure 12)
Using WL-2111
Wireless USB vs. Wireless AP