Draft
Configuration
10
BETA
P/N: 001287, Rev. 1
3.
Check the
Activate these APs using the template
radio button.
4.
Click
Activate
.
The system will now use the AP template that you created in
“Creating an AP Template” on page 6 to activate the selected
APs.
5.
You can verify that all APs were activated by waiting a
minute and then going to Wireless LAN> Controller >
Configuration > Access Points > Activated APs tab. The
activated APs should now appear.
Note:
If this is the first time that you activated an AP, then the
software on the AP upgrades automatically. The AP is
unreachable for about a minute while the software
upgrades.
6.
Finally, save the configuration by clicking
Save
Configuration
located on top of the user interface.
