19
1. Automatic ending mode
The test will automatically stop at a certain point in time (when the
moisture content does not change within 45 seconds) in the automatic
stop mode. This mode takes effect after 15 seconds of heating.
After the test is completed, the display shows the sample moisture
content, heating time and current temperature.
2. Manual ending mode
The sample is in the test state and press the
“
START/STOP
”
button to
terminate the test.
After the test is completed, the display shows the sample moisture
content, heating time and current temperature.
Manual stop is only available in this modes.
3. Timing ending mode
Preset an analysis time, the heating will stop automatically when the
specified length of time is reached.
