U.S.
Solid®•
USS-DBS Models • All Rights Reserved •
Page 3
U.S.
Solid®
• 1200 E.55th Unit C, Cleveland, OH, 44103 • www.ussolid.com
Thank you for choosing U.S. Solid’s Analytical Balance. We hope you enjoy your pur-
chase. Please maintain the equipment according to all instructions within the manual.
This product was developed according to CE marking regulations while emphasizing
aesthetics and safety for the user. It has ISO certification, specifically ISO 9001 The high
quality of the product, coupled with proper user care, should allow you to enjoy the
product for years.
Improper use of this equipment can cause accidents, including but not limited to:
electric discharges, circuit breaker malfunctions, fire, etc. Please read the mainte-
nance section, where this is explained more fully.
FOR BEST RESULTS AND LONGEVITY IN PRODUCT
EFFICACY, READ THROUGH THIS MANUAL THOROUGHLY
BEFORE USING THE PRODUCT
Please bear in mind the following:
•
This manual should be kept with the analytical balance, so it is
available to all users
•
Be careful when handling the balance. Avoid any sudden
movements when in its vicinity. Be sure to not drop the balance,
nor drop any heavy/sharp objects on it. Keep liquids away from the
balance to avoid spills.
•
Never take apart the balance to try and fix yourself. This could ruin
the entire balance, and voids the product warranty. There is also risk
of injury when disassembling the balance.
•
To prevent fire and electrical issues, avoid dusty or overly dry
environments. In case of electrical issue or fire, unplug the balance
immediately.
•
During setup, installation, and use, contact your wholesaler with any
questions that arise.
•
This equipment is protected under the Warranties and Consumer
Good Regulation (10/2003)
•
Overhaul is not covered by the equipment warranty
•
Changes made to the product by non-certified individuals will result
in a loss of the product warranty
•
Accessories, including their loss, are not covered by the product
warranty, nor does the warrant cover piece’s deterioration over the
course of time.
•
Keep your invoice, either for having the right to a warranty, or for
asking for warranty coverage. Manufacturer reserves the right to
modify or improve the manual or equipment.
I
I. Getting Started
