U.S. Solid USS-DBS01 Series Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 37

U.S. Solid USS-DBS01 Series Скачать руководство пользователя страница 3

2

I. Getting Started

Thank you for choosing U.S. Solid USS-DBS01 Series Mobile-controlled
Analytical Balance. We hope you enjoy your purchase. Please use and
maintain the equipment according to all instructions within the manual.

The U.S. Solid Mobile-controlled Analytical Balances innovatively enable
app-controlled function on the basis of normal operating mode, which
means you can now connect and control your U.S. Solid analytical
balance with mobile device. We believe this new feature will improve
our users’ experience, with minimum extra cost.

*Note: Please download

U.S. Solid Balance

app in App Store (IOS) or

Google Play Store (Android) before using.

This product was developed according to CE marking regulations while
emphasizing aesthetics and safety for the user. It has ISO certification,
specifically ISO 9001 The high quality of the product, coupled with
proper user care, should allow you to enjoy the product for years.

Improper use of this equipment can cause accidents, including but not
limited to: electric discharges, circuit breaker malfunctions, fire, etc.
Please read the maintenance section, where this is explained more fully.

For best results and longevity in product efficiency, read through this
manual thoroughly before using the product.

Please bear in mind the following:

«
1
2
3
4
5
...
»

Содержание USS-DBS01 Series






































Отзывы:

Нет отзывов