U.S. Solid MR-13D, Руководство по эксплуатации

Страница: 10 / 11

1. Use the brush to clean the machine, then use dry cloth to clean the
surface.
2. If you just use the the machine, please wait 3 minutes after the grinding
temperature is fall.
3. Use the left hand to hold the wheel, then use the 4mm hex wrench to
loose the screw counterclockwise by right hand.
4. Take out the diamond grinding wheel on the machine.
5. Replace the new grinding wheel.
6. Put the wheel into the principal axis of motor, and tighten the screw and
the wheel cover to complete.
Notice: motor principal axis is very precise, if wrong work may be leading to
the damage, thus affecting grinding wheel position.