INSTRUCTIONS
for using your Save-A-Tow Traction Ramp™ in snow,
ice (not glare ice), sand or mud.
Use the Ramp the second your wheels start to spin. The
shallower the hole, the quicker you’ll be out.
1. Stuck dead center.
2. Roll forward and
set brake.
3. Shove Ramp in place
firmly like a shoehorn.
4.
SLOWLY
back out.
REVERSE THIS PROCEDURE IF YOU WISH TO DRIVE FORWARD
CAUTIONS:
NEVER
spin your wheels on the Ramp. You will melt the
studs with 600o friction. Move out slowly.
NEVER
use the Ramp on flat, glare ice. It won’t help
and you may break the Ramp. Instead, use sand, ashes,
newspaper, etc.
WARNING: NEVER
allow anyone to stand or kneel
behind or in front of your vehicle. You could seriously
injure anyone in the way.
GUARANTEE
We guarantee that the Save-A-Tow Traction Ramp™ will
support more than a 2,000 pound load - one wheel of an
unloaded car, van, SUV or pick-up truck. If it does not,
contact us at: www.ussafetysolutions.com. After testing,
if found defective, it will be replaced at our expense.
