VAC (1) & PUMP (2) SWITCHES:
These switches are powered by cord #1. The Vac and Pump switches will illuminate when
turned on.
PRESSURE SETTING SWITCH (3):
Changes pump pressure.
CORD 1 LIGHT (4):
This green light will turn on when Cord #1 is pluged in.
MODE LIGHT (5):
This light will only illuminate when the heater is heating and will turn off when it reaches
operating temperature. Note: this light will be on most of the time during normal operation.
1
2
3
4
VAC 1
VAC 2
PUMP
BYPASS
LOCA
TOR
MODE
HOLDING TANK LID
SWITCH PLATE
LID (RECOVERY TANK)
VAC INTAKE
LATCH (2)
DRAIN GATE
CASTOR
VENT
PRIMING HOSE IN
POSITION FOR PRIMING
WHEEL
PRESSURE GAUGE
(ON REAR)
VAC
PUMP
300 PSI
200 PSI
CORD 1
MODE
1
2
3
4
5
SWITCH PLATE:
