INSPECTION:
Carefully unpack and inspect your LT-350 for shipping damage. Each machine is tested and inspected
before shipping. Any shipping damage incurred is the responsibility of the carrier. You should notify the
carrier immediately if you notice damage to the box or to the machine or parts.
CLEANING SOLUTIONS
:
We recommend liquid cleaning chemicalsr. Powder chemicals may be used, but unless mixed very thoroughly
they could cause a build-up in the pump, lines, heat exchanger and/or quick disconnects. Any problem
caused by a chemical build-up is not covered by warranty. Use a neutral cleaner with a pH between 5 and 10
to avoid premature wear of the pump, seals, and/or other components. Damage caused by the use of strong
chemicals is not covered by the warranty.
MAINTENANCE:
For optimum performance flush the machine with clear water at the end of each working day. Once a
month, minimum, run a flushing compound through the machine to break up any mineral or chemical
build-up that may have formed. Lubricate the wheels, castors, and quick disconnects with an all purpose
silicone spray. The vacuum and the pump do not require any maintenance. Clean the body with an all
purpose detergent, and protect it with an automobile interior polish.
Recovery
Tank Lid
Switch
Plate
Vacuum Hose
Connection
Solution Hose
Connection
Vacuum Hose
and Solution
Hose on Reel
Latch
Wheel
Pressure Gauge
Castor
Solution Tank Lid
Dump Hose
Vacuum Hose
from Reel to Tank
