02/12/2003
INSPECTION:
Carefully unpack and inspect your KING COBRA-310 for shipping damage. Each machine is tested and
inspected before shipping. Any shipping damage incurred is the responsibility of the carrier. You should notify
the carrier immediately if you notice damage to the box or to the machine or parts.
CLEANING SOLUTIONS:
We recommend liquid cleaning chemicals, such as our Magic Fabric Cleaner. Powder chemicals may be used,
but unless mixed very thoroughly they could cause a build-up in the pump, lines, heat exchanger and/or
quick disconnects. Any problem caused by a chemical build-up is not covered by warranty. Use a neutral
cleaner with a pH between 6 and 9 to avoid premature wear of the pump, seals, and/or other components.
Damage caused by the use of strong chemicals is not covered by the warranty
.
MAINTENANCE:
For optimum performance flush the machine with clear water at the end of each working day. Once a
month, minimum, run a flushing compound through the machine to break up any mineral or chemical build-
up that may have formed. U.S. Products “X-1500” is recommended. Lubricate the wheels, castors, and
quick disconnects with an all purpose silicone spray. The vacuum and the pump do not require any
maintenance. Clean the body with an all purpose detergent, and protect it with an automobile interior polish.
Recovery
Tank Lid
Switch
Plate
Vacuum Hose
Connection
Solution Hose
Connection
Vacuum
Hose and
Solution
Hose on
Reel
Latch
10 Inch
Wheel
4 inch
Castor
Solution Tank
Lid
Pressure
Gauge
Circuit
Breaker
