U.S. Products HHP-300 Скачать руководство пользователя страница 3

INSPECTION:

Carefully unpack and inspect your HHP -300 for shipping damage.  Each machine is tested
and inspected before shipping.  Any shipping damage incurred is the responsibility of the
carrier.  You should notify the carrier immediately if you notice damage to the box or to the
machine or parts

.

CLEANING SOLUTIONS:

We recommend liquid cleaning chemicals.  Powder chemicals may be used, but unless mixed
very thoroughly they could cause a build-up in the pump, lines, heat exchanger and/or quick
disconnects.  Any problem caused by a chemical build-up is not covered by warranty.  Use a
neutral cleaner with a pH between 5 and 10 to avoid premature wear of the pump, seals,
and/or other components.  Damage caused by the use of strong chemicals is not covered by
the warranty.

MAINTENANCE:

For optimum performance flush the machine with clear water at the end of each working day.
Once a month, minimum, run a flushing compound through the machine to break up any
mineral or chemical build-up that may have formed.  The vacuum motor, pump motor, and the
pump do not require any scheduled maintenance; however, the motors may require
replacement brushes after 1000 - 1500 hours, and the pump and bypass valve may require
rebuild kits after 1000 - 1500 hours, typically (refer to machine part list for numbers).  Clean
the body with an all-purpose detergent, and protect it with an automobile interior polish.
Lubricate the wheels, castors, and quick disconnects with an all purpose silicone spray.

PARTS AND SERVICE:

Repairs, when required, should be performed by your authorized distributor who maintains an
inventory of original replacement parts and accessories.  Call the distributor  from whom you
purchased this machine if you need parts and service.  Be sure to specify the machine model.
Have your serial number handy.

Serial Number: __________________
Model: HHP-300
Purchase Date:
_____________
Write the name and phone number of our distributor:
_____________________________________
_____________________________________

(and be sure to register your purchase to activate your warranty)

Содержание HHP-300









Отзывы: