background image

2

IMPORTANT SAFETY INSTRUCTIONS

This machine is only suitable for commercial use, for example in hotels, schools, hospitals, factories, shops

and offices other than normal residential housekeeping purposes.

When using any electrical appliance, basic precautions should always be followed, including the following:

NOTE

: Read all instructions before using this machine.

  WARNING!

To reduce the risk of fire, electric shock, or injury:

INTRODUCTION

This manual will help you get the most from your COBRA-C2 Extractor

.

  Read these instructions thoroughly

before operating the machine.  This product is intended for commercial use only.

PARTS AND SERVICE

Call the distributor from whom you purchased your machine when you need parts or service.  Please
specify the Model and Serial Number when discussing your machine.

UNCRATING

When the machine is delivered, carefully inspect the shipping carton and the machine for damage.  If damage
is evident, save the shipping carton so that it can be inspected.  Contact the shipping company immediately
for instructions on how to file a freight damage claim.

SERIAL NUMBER PLATE

The Serial Number of your machine is shown on the plate that is mounted on the floor of the base
compartment.  This serial number and model are needed when ordering replacement parts for the machine.
Use the space below to note the Model and Serial Number of your machine for future reference.
MODEL :    

COB-C2-230CEN/A

            SERIAL NUMBER : _____________________________________

Be sure to go to www.usproducts.com to register your warranty on-line..

Do not leave the maching unattended when it is plugged in.  Unplug the unit from the outlet when not in use
and before servicing.

To avoid electric shock, do not expose to rain or snow.  Store, and use, indoors.

Do not allow to be used as a toy.  Close attention is necessary when used near children.

Use only as described in this manual.  Use only the manufacturer’s recommended attachments.

Do not use with damaged cord or plug.  If the machine is not working as it should, has been dropped,
damaged, left outdoors or dropped into water, return it to a service center.

Do not pull by the cord, use the cord as a handle, close a door on the cord, or pull the cord around sharp
edges or corners.  Do not run the machine over the cord.  Keep the cord away from heated surfaces.

Do not unplug by pulling on the cord.  To unplug, grasp the plug, not the cord.

Do not handle the plug, the cord or the machine with wet hands.

Do not put any object into openings.  Do not use with any opening blocked; keep free of dust, lint, hair, and
anything that may reduce air flow.

Keep loose clothing, hair, fingers, and all parts of body away from openings and moving parts.

Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes, or any
health endangering dusts.

Turn off all controls before unplugging.

Use extra care when cleaning on stairs.

Do not use to pick up flammable or combustible liquids such as gasoline or use in areas where they may
be present.

Connect to a properly grounded outlet only.

Liquid ejected at the spray nozzle could be dangerous as a result of its temperature, pressure or chemical
content

.

Содержание COBRA-C2









Отзывы: