U.S. Products 100-041-016, Руководство оператора

Страница: 19 / 58

13 - Express 12 gallon Multi surface cleaner - operator and parts Manual
MacHinE sEtup
The Express Multi Surface Cleaner is shipped almost fully assembled. Before you set it up
for operation, carefully check the shipping carton for signs of damage. Report damages
at once to the carrier.
Before starting the machine, remove the
solution tank and replace the shipping
plug (P/N 000-106-001) with the vent plug
(P/N 000-106-014), shipped with your
machine (see Figure 3). Failure to install the
vent plug will damage the gear case seal.
Set up the Express by following these steps:
Ensure all three control switches are in the 1.
OFF position (see Figure 4).
Attach the cleaning head assembly that is
2.
appropriate for the surface to be cleaned
Before installing the cleaning head, refer to
page 24 for lubrication instructions.
Turn the cleaning head counterclockwise 3.
when installing it. Note that the spindle
has a left-hand thread (see Figure 5).
With a clean bucket or hose, fill the 4.
solution tank with 12 gallons (46 litres) of
hot water, 140° F (60° C) maximum.
Do not use flammable materials in the
tanks. Flammable materials can cause an
explosion or fire which can cause serious
injury or death.
Ensure all switches are in figure 4.
the off Position
replace shipping Plug figure 3.
with Vent Plug
turn the Cleaning Head figure 5.
Counterclockwise when Installing