SKU 93663
For technical questions please call 1-800-444-3353
Page 3
9.
Maintain tools with care. Keep tools maintained and clean for better and safer
performance. Inspect tool cords periodically and, if damaged, have them repaired
by a qualified technician. The handles must be kept clean, dry, and free from oil
and grease at all times.
10. Disconnect power. Unplug battery charger when not in use.
11. Stay alert. Watch what you are doing, use common sense. Do not operate any
tool when you are tired.
12. Check for damaged parts. Before using any tool, any part that appears damaged
should be carefully checked to determine that it will operate properly and perform
its intended function. Any part that is damaged should be properly repaired or
replaced by a qualified technician. Do not use the tool if any switch does not turn
On and Off properly.
13. Replacement parts and accessories. When servicing, use only identical
replacement parts. Use of any other parts will void the warranty. Only use
accessories intended for use with this tool. Approved accessories are available
from Harbor Freight Tools.
14. Do not operate tool if under the influence of alcohol or drugs. Read warning
labels on prescriptions to determine if your judgment or reflexes are impaired
while taking drugs. If there is any doubt, do not operate the tool.
15. Use proper size and type extension cord. If an extension cord is required, it
must be of the proper size and type to supply the correct current to the tool
without heating up. Otherwise, the extension cord could melt and catch fire, or
cause electrical damage to the tool. This tool requires use of an extension cord
of 0 to 10 amps capability (up to 50 feet), with wire size rated at 18 AWG. Longer
extension cords require larger size wire. If you are using the tool outdoors, use
an extension cord rated for outdoor use (signified by “WA” on the jacket).
16. Maintenance. For your safety, service and maintenance should be performed
regularly by a qualified technician.
Note: Performance of the battery charger may vary depending on variations
in local line voltage. Extension cord usage may also affect tool performance.
Warning: The warnings, cautions, and instructions discussed in this
instruction manual cannot cover all possible conditions and situations
that may occur. It must be understood by the operator that common sense
and caution are factors which cannot be built into this product, but must
be supplied by the operator.
