Serial WiFi adapter – Industrial
Part
no. WF5000B
The WF5000B is a light-industrial grade serial RS232 to WiFi
adapter which can be used to connect any standard RS232
serial device to a computer over an open or secure wireless
network.
It has a strong aluminum housing with screw mounting holes for
easy installation which makes it ideal for most factory
environments and other commercial facilities.
Supported network protocols are TCP, UDP, ARP, ICMP,
DHCP, DNS, HTTP using the 802.11b/g/n standards in AP or
STA modes. Supported security protocols are
OPEN,
OPENWEP, SHAREDWEP, WPA-PSK and WPA2-PSK.
The parameters of the adapter can be configured by a web-
browser over WiFi or through the serial port by using the
downloadable configuration software.
Please download the latest
drivers and user guides for
this product from:
www.USconverters.com
Wireless standard
802.11 b/g/n
Frequency range
2.412GHz-2.484GHz
Transmit power
802.11b: +20dBm(Max.)
802.11g: +18dBm(Max.)
802.11n: +15dBm(Max.)
Receiver Sensitivity
802.11b: -89dBm
802.11g: -81dBm
802.11n: -71dBm
Antenna
External 3dbi antenna
Baud rate
300 - 460800bps
Data bits
5, 6, 7, 8
Parity
None, Odd, Even, Mark, Space
Stop bits
1, 2
Flow control
CTS/RTS, None
Ethernet
100Mpbs, AUTO MDI/MDIX
RS232 signals
TX, RX, RTS, CTS, GND
UDP Multicast supported
No
Operating voltage
5 - 9VDC (+/-5%) with TVS protection
Serial Port
RS232, DB9 Male
Operating current
1500mA (max)
Operating temperature
-25C- 85C
Storage temperature
-40C- 125C
Dimensions
83×80×25mm
Network type
STA, AP, STA+AP mode
Number of simultaneous
clients
32 in TCP Server mode
Security
OPEN, OPENWEP, SHAREDWEP,
WPA-PSK and WPA2-PSK
Work mode
Transparent Transmission
UDP Multicast supported
No
Serial command
AT+ instruction set
Network Protocols
TCP, UDP, ARP, ICMP, DHCP, DNS,
HTTP
Max. TCP Connections
32
User Configuration
Web-browser (over WiFi), by AT
commands or by software utility
Certifications
FCC/CE
