6
Figure 3: Burner Flame
NOTICE
The Alpine has a heat exchanger made from a
special stainless steel alloy which can be severely
damaged by frequent additions of water or by the
addition of boiler water additives which are not
designed for use with stainless steel boilers. If
it is necessary to add water to the boiler, have
a service technician check the system for leaks.
Do not add any chemicals to the boiler not listed
in Section X of the Alpine. Warranty is void if the
service and maintenance procedure shown in
Section XII of the Alpine instruction manual is not
followed.
WARNING
Carbon (“soot”) in or near the burner
compartment area is an indication of a potential
carbon monoxide hazard. If carbon is found,
immediately follow instructions "TO TURN OFF
GAS TO APPLIANCE" in Figure 2 and contact a
qualified gas service technician to correct the
problem before placing the boiler back in service.