14
Device Power Cycle
To show the count of HDD's turning on and off.
Power-on Hours
To show the total hours of HDD powering-on.
Reallocation Event Count
To show the count of reallocating event.
When the HDD fails to save data, it will need to redefine the location to store
data. Therefore, more count of reallocation event represents more error times.
Off-Line Scan Uncorrectable Sector Count
To show the sector volume that is uncorrectable when scanned off-line. The
more the uncorrectable sector volume is, the more serious the HDD's damage
is.
Seek Error Rate
To show the error rate of searching for data. It can represent the damage rate
of data stored in the HDD.
Temperature
To show the temperature of HDD.
5.2 Update System
Step 1: Create an Update HDD
Place a SDD/HDD to the duplicator. Select function "5.2 Create Update HDD".
Step 2: Format BIOS HDD
Click "OK" to format the BIOS hard disk. One FAT, 2GB partition will be
formatted in HDD. That would reduce searching time, and speed up firmware
update.
Caution The data saved in this HDD will be erased.
[Update System]
2. Create Update HDD
Do FORMAT HDD#1
Confirm ?
