Chapter
➁
- Function Introduction
11
1
Copy
It copies data from the source HDD to the target HDD. Please ensure
you have selected the copy mode require before executing the copying
process. Refer to function [6.1 Copy Area] for details.
Copy Process
Copie Time
Total data capacity
Copied data capacity
Copy Process %
Copy 2047M
0:26 50% 1037M
Copy Result
Pass 0:58
No Bad Sector!
Note
The default setting is the quick copy mode “System and Files”.
2
Compare
It is used to check if the data on the target HDD is identical to the source
HDD after the duplication is finished.
3
Copy+Compare
It executes the copying first, and then it compares the target copied with
the source to check the correctness of the duplication.
