U-Reach MT1600G, Руководство пользователя

Страница: 10 / 40

➁
Function Table
10
⌘
MT-G & MT-H Series
Function Items/Description
1. Copy
Copy data from source HDD to targets.
(There are four copy modes for selection at function "6.2 Copy Area")
2. Compare
Comparison between the source and targets to make sure copy accuracy.
3. Copy +
Compare
Execute compare function automatically after copy.
4. Erase
4.1 Quick Erase
Erase the INDEX of HDD, and take very short time.
4.2 Full Erase
Ease the whole HDD
4.3 DoD Erase
Erase HDDs three times complying with USA Department of Defense (DoD) standard.
4.4 DoD EraseComp
Erase HDDs three times complying with USA Department of Defense (DoD) standard
and bit-by -bit to check if data is completely erased.
4.5 Secure Erase
The international authorized high standard Secure Erase function. Even HPA/DCO or
other data area which are not able to load, can be erased all together with this mode.
5. Utility
5.1 Show Disk Info.
Show HDD’s basic information such as HDD model name and capacity.
5.2 Update System
5.2.1 Update BIOS
Update the system firmware via the HDD.
5.2.2 Format HDD
Format the HDD with a 2GB FAT partition in order to quickly
save firmware in the HDD.
5.3 System Info.
This function will show information of the duplicator system, including controller model
number and software version.
6. Setup
6.1 Start-up Menu
Select which function is shown first when the system is turned on. Select from item 1~7.
6.2 Copy Area
6.2.1 System and Files
Set to copy source HDD's data area only.
6.2.2 ALL Partitions
Set to copy source HDD's.
6.2.3 Whole HDD
Set to copy the whole source HDD.
6.2.4
Percentage(%)
Set up percentage range of HDD for copy.