U-Reach Carry Series Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 21

U-Reach Carry Series Скачать руководство пользователя страница 10

9

Functions

1. Copy

Step 1: Prepare source and target devices.

Step 2: Connect source and target devices.

Step 3: Proceed to copy.

Scroll to select "1. Copy", then press "OK" to start the duplication process.

The information below states what is displayed on the LCD during duplication.

Caution

It is recommended to reboot the machine after manually stopping the copy.

Step 4: Copy Completed!

The quantity of passed or failed target device(s), the copied duration, and CRC
Value will be displayed on the LCD after duplication completes.

2. Compare

Proceed to verify device(s).

Scroll to select "2. Compare", then press "OK" to start the verification process.

Note

Recommendation: Target device(s)’ capacity must be equal to or larger than
the source device capacity.

Note

The number of working/connected targets will be displayed on LCD. Press
"OK" to start.

Note

⚫

Press “

▲▼

” together for 5 seconds to stop operation on the slowest

device.

⚫

Press “ESC” for 5 seconds to stop all the copy jobs.

Note

The number of working/connected targets will be displayed on the LCD. Press
"OK" to start.

«
...
8
9
10
11
12
...
»

Содержание Carry Series






















Отзывы:

Нет отзывов