http://u-prox.com
12
"Blocking" Mode
If it is necessary to deny access to AP to all users of the system, the panel switches
into
“Blocking" mode. If AP is in “Blocking" mode, the passage is granted only to
owners of RF IDs with the sign "Security Service". AP cannot be opened by pressing
RTE.
In "Blocking" mode LED is alternately flash red and yellow
Access point goes into
“Blocking" mode after the operator command from the
computer or after loop violation designated as BLOCKING. Access point is in
“Blocking" mode for as long as the loop is violated or until the command from the
computer (while the loop is broken, command from the computer will not work).
Panel allows to configure loop function
“Blocking" for access point A, B, or for both
access points (A + B).
RF ID properties (cards)
Code (RF ID card code)
Each card has a unique code which is set at the time of its manufacture. It consists
of 10 hexadecimal digits.
PIN-code
Additional code is assigned to the card. It consists of no more than six decimal digits.
It can be used together with readers that have a built-in keyboard.
Enter PIN code with the reader's keypad and press '#' key. Always enter PIN code
AFTER the card pass. If PIN-code is correct, panel unlocks access point and grants
access. Otherwise, panel generates a warning signal, and records "Invalid PIN-
code" event into the log. Door remains closed.
Validity (of Card)
Card Validity expiration date.
Alarm Cancel
Passing the card to door reader, when the door is in "Alarm" state, panel registers
event "Alarm cancelled" and puts the door to Normal mode. If the card that has no
right to cancel
the “Alarm” is passed, the door will remain in the same state. “Access
denied. Alarm Status" event recorded into the log.
Security Service
Security Service mark gives the right of access to a Blocking door.
When the ordinary card is passed
if door is in "Blocking” Mode, "Access denied.
Blocking
state” event recoded. Card with attribute “Security Service" pass. If the card
is valid and has access right at the moment, the panel gives access and event
“Access granted. Blocking state» is registered.
VIP
Access right to pass always everywhere, except through Blocking door.
VIP card may be assigned any schedule, Antipassback and validity period is NOT
applied to it. The card may have PIN code
