5.
Pair Bluetooth Headset
·
Pairing
- When pressing power / Call button for 3 second, power lamp is on with “Beep” sound.
- Then you must not release the button until the “Blue” lamp is flickering quickly with the beep
sound.
- This shows that the product is ready to be paired with other devices.
- Select
“
Search the device
”
or menu of
“
Inquiry
”
to the Bluetooth Mobile phone or PC.
- Then you will see the word of the search window
“
UNEEDS UNB-2000S
”
- Select it then your mobile phone asks PIN number,
- Enter the number 0000 and push the
“
OK
”
button
- Blue lamp of the Headset is begun to flicker out in every 2 seconds and the following
message is shown up
“
to be connected between Headset and PC or Mobile phone
”
.
- It is ready to be used.
·
Disconnect
- Press “Disconnect” to return to stand-by mode
*Pairing with USB Dongle
- Insert the USB Dongle in the USB port of your PC.
- Press pairing button for 3 seconds
- The Blue and Red lamp is flickering quickly.
-A few seconds later, pairing process will be automatically finished.
6.
How to use “UNB-2000S”
A.
Music listening
- You can enjoy high quality stereo music by mobile phone or PC which is supported by the
Bluetooth technology.
- Play / Stop: Using this button you can play or stop the music.
- Previous Music / Next Music: You can select music with this button.
B.
Telephone Calling
- “UNB-2000S “supports to voice telecommunication on the mobile phone or VolP of PC.
- When you have an incoming call while playing the music, it is automatically converted to
the talk mode with pausing the music.
- After finishing talk, it is automatically converted to the music mode again.
- Turn-on / off button
z
When you have an incoming call, you will hear ring tone from your speaker then just
