U.N.O Fitness 10050, Руководство пользователя

Страница: 7 / 32

6
2012/12/3 V1.0+V1.0
5. ASSEMBLY STEP
Two persons are required to finish the
assembly steps.
(Caution!! Please follow exactly the assemly steps
below to aviod injury . )
1. After pull out Control Wire
with Guide Thread in the
Upright, cap it into the hole of
the Upright. When left and
right Uprights (C, D) are fixed,
screw with Allen Bolt (a,c) as
shown in the right drawing,
but not tighten.
(Ps1. To avoid unexpected accident, always
assemble the treadmill with an assistant, do
not assemble by oneself.
Ps.2. When assemble the Upright, one person
should hold the Upright to prevent it from
falling.)
2. Connect left and right
Handrails (E,F) with Computer
Console (A) and then insert
left and right Handrails into
the tubes of Computer Console
according to the right drawing.
(Ps1.
When assembly, please make sure that
the holes of left and right Handrails are
corresponding with the holes of
computer fixing tubes so as to continue
other steps.)
(Ps2. If the treadmill has the function of
handrail switch, please pay attention
when assembly, the left handrail switch
is angle and right one is speed.
)