QUICK START GUIDE
Interior Adjustments
INTERIOR SHELVES
Removing and Installing Interior Shelves
For models equipped with glass shelves having recessed
shelf supports, remove the shelves as follows:
1.
Pull shelf out about 6” (1), until back of shelf clears
the “hump” on the right-hand side.
2.
Tilt up right-hand edge of shelf (2).
3.
Remove shelf from unit by pulling out (3).
Insert the shelves as follows:
1.
To move to a different position in the unit, insert shelf
at an angle, approximately 15-20°, over the rib in the
side of the unit where you want to place the shelf.
Place the shelf into the unit at an angle to clear the
door.
2. Continue to slide the shelf into the unit at an angle
until it clears the door.
Lower the shelf and push it in completely. Ensure the
raised edge strip is toward the rear of the unit.
NOTICE
Make sure the shelves are inserted fully into the
2
3
1
12