background image

USER GUIDE

u-line.com

Introduction

WELCOME TO U-LINE

Congratulations on your U-Line purchase. Your product comes from a company with over five decades of premium modular ice 
making, refrigeration, and wine preservation experience. U-Line creates products focused on functionality, style, and inspired 
innovations — paying close attention to even the smallest details. Applications include residential, outdoor, ADA height 
compliant, marine, and commercial. Complete product categories include Beverage Centers, Wine Refrigerators, Ice Machines, 
Refrigerators, Freezers, and Dispensers.

Our advanced refrigeration systems, large and flexible capacities, and Built-In to Stand Out

®

 clean integrated look allow you 

to preserve the right product, in the right place, at the right temperature. Since 2014, U-Line has been part of the Middleby 
family of brands. All products are designed, engineered, and assembled in Milwaukee, Wisconsin, USA, and select products 
are available worldwide.

PRODUCT INFORMATION

Looking for additional information on your product? User Guides, Spec Sheets, CAD Drawings, Compliance Documentation, 
and Product Warranty information are all available for reference and download at u-line.com.

PROPERTY DAMAGE / INJURY CONCERNS

In the unlikely event property damage or personal injury is suspected related to a U-Line product, please take the following 
steps:

1.  U-Line Customer Care must be contacted immediately at +1.414.354.0300.
2.  Service or repairs performed on the unit without prior written approval from U-Line is not permitted. If the unit has been 

altered or repaired in the field without prior written approval from U-Line, claims will not be eligible.

GENERAL INQUIRIES

U-Line Corporation
8900 N. 55th Street
Milwaukee, Wisconsin 53223 USA 
Monday - Friday 8:00 am to 4:30 pm CST 
T: +1.414.354.0300
Email: [email protected]
u-line.com

CONNECT WITH US

SERVICE & PARTS ASSISTANCE

Monday - Friday 8:00 am to 4:30 pm CST 
T: +1.414.354.0300 
Service Email: [email protected] 
Parts Email: [email protected]

Designed, engineered and assembled in WI, USA

3

Содержание UHWC124
















































Отзывы: