USER GUIDE
Door Adjustments
u-line.com
Remove door by tilting forward and lifting door
off
bottom hinge. Retain shoulder washers; they will
be
reused.
Remove three screws from hinge holes on the
opposite
side. Reinstall into holes where the hinge
was
removed. Take care not to scratch cabinet.
Remove bottom hinge:
1. Remove bottom hinge from cabinet using 1/4” socket.
2. Remove corresponding screws on opposite side of
cabinet. On some models there may be a nut behind
one or both screws on either side.
Install bottom hinge:
Install two or three screws, depending on model.
Replace nuts if used.
Install top hinge and door:
1. Rotate door 180
0
and
l
ift the door on to the bottom
hinge.
2. Install hinge that was used on the opposite side of
the unit
3.
Align edge of the hinge with the outer edge of the
unit
while inserting hinge pin into top of door
.
4.
Tighten three screws and replace hinge
cover
.
Align and adjust the door:
Align and adjust the door (see DOOR ALIGNMENT AND
ADJUSTMENT).
Install grille:
Install the grille.
5.
6.
15
