U-Line U-CO2175FB-00 Скачать руководство пользователя страница 23

U-Line Combo® Models and Ice MakersCleaning

20

Condensor Cleaning

Interval - Every Three Months

To maintain operational efficiency, keep the front grille free of dust 
and lint, and clean the condenser every three months. Depending 
on environmental conditions, more or less frequent cleaning may 
be necessary.

WARNING

Disconnect electric power to the unit before cleaning 
the condenser.

WARNING

DO NOT touch the condenser fins. The condenser fins 
are SHARP and can be easily damaged.

IMPORTANT

IMPORTANT

DO NOT use any type of cleaner on the condenser unit.

1. Remove the grill. (See MAINTENANCE)

2. Clean the condenser coil (4) using a using a soft brush with a 

“combing” action or vacuum cleaner. Do not touch the 
condenser coil.

3. Install the grill. (See MAINTENANCE)

Storage, Vacation and Moving

If not using the unit for an extended period, or otherwise stored, 
follow these steps completely:

WARNING

Electrical Shock Hazard. Disconnect power before 
servicing. Before operating, replace all panels. Failure 
to do so may result in death or electrical shock.

IMPORTANT

IMPORTANT

If the ambient temperature is expected to drop below 
50°F, turn off and unplug unit, and drain all water from the 
unit to prevent freezing damage not covered by the 
warranty.

1. Remove all consumable contents from the unit.

2. Disconnect the power cord from its outlet, and leave it 

disconnected until the unit is returned to service.

3. Clean and dry the interior of the cabinet.

4. During periods of nonuse, the cabinet must remain open to 

prevent formation of mold and mildew. Open door a minimum 
of 2 in. (5 cm) to provide the necessary ventilation.

Product Disposal

If the unit is being removed from service for disposal, check and 
obey all Federal, State and or Local regulations regarding the 
disposal and recycling of refrigeration appliances, and follow these 
steps completely:

1. Remove all consumable contents from the unit.

2. Disconnect power to the unit and unplug the power cord from 

its outlet.

DANGER

RISK OF CHILD ENTRAPEMENT. Before you throw away 
your old refrigerator or freezer, take off the doors and leave 
shelves in place so children may not easily climb inside.

3. Remove the cabinet door.

4

1

2

5

75 Models

Typical Model Shown

2

1

3

5

4

29 Models

Typical Model Shown

Содержание U-CO2175FB-00


























Отзывы: