U-Line U-3090WCWCOL-00 Скачать руководство пользователя страница 4

u-line.com

1

 

General Information

NOTICE

• PLEASE READ all instructions before installing, 

operating, or servicing the appliance.

• Proper installation procedures must be followed when 

completing an installation or relocation of a unit. An 
INSTALLATION GUIDE for the unit, providing complete 
installation information, is available from U-Line 
Corporation direct. Consult the installation guide before 
any installation begins. U-Line contact information 
appears on the rear cover of this guide.

• This unit requires connection to a dedicated 15 Amp 

grounded (three-prong), polarized receptacle, installed by 
a qualified electrician, compliant with applicable electrical 
codes.

Safety Alert Definitions

Throughout this guide are safety items labeled with a Danger, 
Warning or Caution based on the risk type:

DANGER

!

Danger means that failure to follow this safety statement will 
result in severe personal injury or death.

WARNING

!

Warning means that failure to follow this safety 
statement could result in serious personal injury or death.

CAUTION

!

Caution means that failure to follow this safety statement 
may result in minor or moderate personal injury, property 
or equipment damage.

General Precautions

Use this appliance for its intended purpose only and follow these 
general precautions with those listed throughout this guide:

DANGER

!

RISK OF CHILD ENTRAPMENT. Before you throw away your 
old refrigerator or freezer, take off the doors and leave shelves 
in place so children may not easily climb inside.

This appliance is not intended for use by persons (including children) 
with reduced physical, sensory or mental capabilities, or lack of 
experience or knowledge, unless they have been given supervision or 
instruction concerning use of the appliance by a person responsible 
for their safety. Children should be supervised to ensure that they do 
not play with this appliance.

Do not store explosive substances such as aerosol cans with a 
flammable propellant in this appliance.

WARNING

!

SHOCK HAZARD - Electrical Grounding Required.
• Never attempt to repair or perform maintenance on 

the unit until the electricity has been disconnected.

• Never remove the round grounding prong from the 

plug and never use a two-prong grounding adapter.

• Altering, cutting of electric cord, removal of electric 

cord, removal of electric plug, or direct wiring can 
cause serious injury, fire and/or loss of property and/or 
life, and will void the warranty.

• Never use an extension cord to connect electric 

current to the unit.

• Always keep your working area dry.

If the detachable type electric supply cord is damaged, it must be 
replaced by an equivalent cord available from the manufacturer or its 
service agent.

WARNING

!

Install provided Anti-Tip kit on all 3000 series models. 

WARNING

!

Do not store explosive substances such as aerosol cans 
with flammable propellant in this appliance.

WARNING

!

Requirement for an external switch in the fixed wiring is 
specified. 

General Information

Содержание U-3090WCWCOL-00


































Отзывы: