PAGE 2 OF 21
0521 IH-6489
GROUNDING INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS CONTINUED
This appliance must be grounded. If it should
malfunction or break down, grounding provides a path
of least resistance for electric current to reduce the
risk of electric shock. This appliance is equipped with
a cord having an equipment-grounding conductor
and grounding plug. The plug must be inserted into
an appropriate outlet that is properly installed and
grounded in accordance with all local codes and
ordinances.
WARNING! Improper connection of the
equipment-grounding conductor can result in
a risk of electric shock. Check with a qualified
electrician or service person if you are in
doubt as to whether the outlet is properly
grounded. Do not modify the plug provided
with the appliance. If it will not fit the outlet,
have a proper outlet installed by a qualified
electrician.
1. This appliance is for use on a nominal 120-volt
circuit and has a grounded plug that looks like the
plug illustrated in sketch A. (See Figure 1)
2. A temporary adapter, like the adapter illustrated in
sketches B and C, may be used to connect this plug
to a 2-pole receptacle (as shown in sketch B) if a
properly grounded outlet is not available.
(See Figure 1)
3. The temporary adapter should be used only until a
properly grounded outlet (sketch A) can be installed
by a qualified electrician. The green colored rigid
ear, lug or the like extending from the adapter must
be connected to a permanent ground, such as a
properly grounded outlet box cover. Whenever the
adapter is used, it must be held in place by a metal
screw. (See Figure 1)
NOTE: In Canada, the use of a temporary
adapter is not permitted by the Canadian
Electrical Code. Make sure that the appliance
is connected to an outlet having the same
configuration as the plug. No adapter should
be used with this appliance.
EXTENSION CORDS
When using the appliance at a distance where an
extension cord becomes necessary, a three-conductor
grounding cord of adequate size must be used for
safety and to prevent loss of power and overheating.
Use the table below to determine A.W.G. wire size
required. To determine ampere rating of your vacuum,
refer to nameplate located on rear of motor cover.
Before using appliance, inspect power cord for loose
or exposed wires and damaged insulation. Make any
needed repairs or replacements before using your
appliance. Use only three-wire outdoor extension cords
that have three-prong grounding-type plugs and three-
pole receptacles that accept the extension cord's plug.
When vacuuming liquids, be sure the extension cord
connection does not come in contact with the liquid.
NOTE: Static shocks are common in dry areas or
when the relative humidity of the air is low. This
is only temporary and does not affect the use of
the appliance. To reduce the frequency of static
shocks, add moisture to the air with a console or
installed humidifier.
VOLTS
TOTAL LENGTH OF CORD IN FEET
120V
25
50
100
150
AMPERE RATING
AMERICAN WIRE GAUGE (AWG)
More
Than
Not More
Than
0
6
18
16
16
14
6
10
18
16
14
12
10
12
16
16
14
12
12
16
14
12
Not recommended
WARNING! Do not use this vacuum cleaner to
vacuum lead paint debris because this may
disperse fine lead particles into the air. This
vacuum cleaner is not intended for use under
EPA Regulation 40 CFR Part 745 for lead paint
material cleanup.
STAY ALERT! Watch what you are doing and use
common sense. Do not use vacuum cleaner
when you are tired, distracted, or under the
use of drugs, alcohol or medication causing
diminished control.
GROUNDING METHODS
GROUNDING
OUTLET
ADAPTER
METAL
SCREW
TAB FOR
GROUNDING SCREW
GROUNDED
OUTLET BOX
GROUNDING
PIN
Figure 1
