background image

U-Line Drawer Panel Installationi Guide

2

Panel installation

1. Place prepared panel against drawer front and secure with 

clamps.

2. Be certain the panel is aligned flush with the top of the drawer 

handle. 

3. Using a #6 Drill bit, drill 8 pilot holes into the wood panel 3/8” 

deep.

IMPORTANT

IMPORTANT

It is important to ensure that all drilled holes are drilled to 
the correct depth in order to avoid splits in the wood 
when hardware is installed.

4. Locate the 8 #6x2” screws provided in the overlay panel install 

kit. 

5. Using a phillips head and #6x2 screws, screw the drawer panel 

to the drawer front.

6. Be sure the screws force their way past the opening on the 

gasket channel and sit flush against the bottom of the gasket 
channel.

7. Repeat for both drawers.

Assembling the Drawer Front

IMPORTANT

IMPORTANT

The bottom of the lower overlay panel will line up with the 
bottom of the adjacent cabinetry and may not line up with 
the bottom of the actual drawer itself. See graphic Below

1. Starting at the corners and working toward the center, push 

the drawer gasket back into place. Repeat for both drawers.

Checking Drawer Alignment

IMPORTANT

IMPORTANT

Drawer panel and overlay panel must be aligned properly 
or the drawer will not operate correctly.

The unit’s drawers are aligned at the factory before shipment. 
However, their alignment could have been disturbed during 
shipment or during overlay panel installation.

See Figure Below. Check each drawer to confirm that it is aligned:

• Side-to-Side — 

When viewed from the top, the drawer front 

should be square with the sides of the cabinet.

• Front-to-Back — 

When viewed from the side, the drawer 

front should be straight with the cabinet’s sides, not cocked 

forward or back.

• Top-to-Bottom — 

When viewed from the front, the drawer 

should be level horizontally.

If either drawer is not aligned, carefully follow instructions 
provided in the Use & Care Manual to remove that drawer, make 
the necessary adjustment and re-install the drawer.

Bottom Of Panel

Drawer Reveal

Panel

Toe Kick

Aligned

Side-to-Side

Aligned
Front-to-Back

Aligned

Top-to-Bottom

Отзывы: