www.U-LineService.com
6
06/2006
1175R, 1175WC and 1175BEV Models
Reversing the Door
(1175 Black & White Units Only)
All units may be left- or right-hand opening (All Stainless
Steel and 1175 Beverage Center units cannot be field-
reversed).
Black and White 1175 Units
To reverse the door on Black or White 1175 models:
1. Remove the grille (two screws).
2. Remove top hinge from cabinet (four screws)
(Figure
4)
. Hold door to keep it from falling.
3. Lift the door off the bottom hinge.
4. Remove four plastic plugs
(Figure 5)
in hinge holes,
top of cabinet, opposite side. Be careful not to scratch
cabinet.
5. Remove pivot screw from top hinge, invert screw and
reinstall pivot screw in top hinge
(Figure 6)
. Do not
install hinge on cabinet at this time.
6. Remove bottom hinge from cabinet (four screws) and
screws on opposite side of cabinet
(Figure 7)
.
7. Remove pivot screw from bottom hinge, invert screw
and reinstall pivot screw in hinge
(Figure 6)
.
8. Install bottom hinge on cabinet, opposite side, aligning
flat edge of hinge with outer edge of unit
(Figure 8)
.
Partially tighten screws.
ULIN_0104_A
Figure 4
ULIN_0105_A
Figure 5
Plastic
Plug Hole
Plastic
Plug Hole
Hinge
Screw
Right Side
Door Swing
Right Side
Hinge
Invert
Screw
Invert
Hinge
Left Side
Door Swing
ULIN_0106_A
Figure 6
ULIN_0107_A
Figure 7
ULIN_0160_A
Figure 8
