PAGE 1 OF 2
0213 IH-2560
π
H-2560
HEX PICNIC TABLE
1-800-295-5510
uline.com
1. Loosely attach the 6 anchor blocks to the bottom of
the 6 seats with the 3½" lag screws and washers with
the socket. The bored hole on the block faces the
side with three edges. (See Figure 1)
2. Place the 3 support arms on a flat level surface in a
fan pattern. Using the 3" deck screws, loosely attach
the support arms together. Use 2 deck screws per
side. (See Figure 2)
Power Drill (Or Screw Gun)
7/16" Socket Wrench
ASSEMBLY
PARTS
TOOLS NEEDED
Base x 3
Anchor Block x 6
3½" Lag Screw x 30
2½" Lag Screw x 6
Support Arm x 3
3" Deck Screw x 6
Washer x 36
Tabletop x 1
Right Seat x 3
Left Seat x 3
Figure 2
Figure 1
