PAGE 3 OF 24
0322 IH-9730
ASSEMBLY CONTINUED
6. Push pedestal file (9) toward modesty panel (4) to hook
keyhole tabs on shoulder screws (K). (See Figure 5)
7. Attach back of pedestal file (9) to side panel with left
L-bracket (I) and four M6 x 15 mm bolts (F). Repeat
at front of pedestal file with right L-bracket (J)
and four M6 x 15 mm bolts. (See Figure 6)
8. Repeat steps 4-7 to install remaining pedestal file
on opposite side.
9. Place center drawer (5) upside down in desired
location on the desktop. Use four ST 5 x 16 mm
self-tapping wood screws (D) to secure.
(See Figure 7)
NOTE: Drawer holes can be started with drill
(optional).
NOTE: It is recommended to have drawer flush
with front edge of desktop panel.
10. With second person, set desk upright. Adjust glides
to compensate for uneven floors. Insert grommet
caps into desktop.
Figure 6
I
F
9
Figure 7
5
D
Figure 5
K
Keyhole Tab
9
4
