PAGE 3 OF 24
0721 IH-9234
ASSEMBLY CONTINUED
b. Align placement hole in the crown with hole in
rafter and insert pin. (See Figure 6)
c. Remove alignment hole pins where hip rafters (HR)
are attached to crown. (See Figure 7)
4. Repeat steps 3b-3c to connect four full
rafters (FR) to the 8-way crown. (See Figure 8)
5. Beginning at a corner fitting, attach eave poles (EV)
to corner fittings and 4-way side tee fittings, working
clockwise around the assembly. Attach to hip
rafters (HR) and full rafters (FR). (See Figures 9-10)
6. Loop end of each ratchet strap to fitting at each
leg location. (See Figure 11)
Figure 7
Figure 6
Placement
Hole
Figure 9
EV
EV
FR
HR
Figure 10
Figure 11
Ratchet
Strap
Figure 8
FR
FR
HR
FR
FR
HR
HR
HR